ZCOMBO-G - First Alert Wireless Smoke/Carbon Monoxide Detector (for Z-Wave Control Panels)
First Alert ZCOMBO-G Product Description:
The First Alert ZCOMBO is a single station combination smoke and CO alarm specifically designed for residential applications. First Alert ZCOMBO has been fully tested to and complies with UL217, UL 2034, CSFM, FCC, IC, Z Wave Plus, NFPA 72, NFPA 720 and other agencies that model their codes after the above agencies. It meets building codes where battery operated Z-Wave wireless smoke and CO alarms are required along with silence features and with model building codes.
First Alert ZCOMBO is a state-of-the-art wireless combination smoke and CO alarm designed to provide early warning of a fire or CO. It features a fully insect screened Photoelectric smoke sensing chamber and an electrochemical carbon monoxide sensor, an 85dB horn, a supervised 3V (2 AA batteries) power supply, utilizes one test button to setup, test and silence. This combination alarm will operate with 3rd party, certified Z-Wave devices enabled with the First Alert protocol and the basic command class required by all Z-Wave devices. First Alert ZCOMBO also includes the Smart Start feature which allows a faster and more intuitive connection of device to hub and on-boarding via use of QR code scan located on device. Upon the detection of smoke or CO conditions, the alarm reports smoke and or CO detected to the controller. The device shall send the applicable message when the conditions are cleared. These notifications must be wrapped in the Supervision CC. The following notifications must be supported. The alarm sends a "Heartbeat" signal to hub periodically to confirm operability. It also features tamper resistant locking pins that lock alarm to the mounting bracket and battery drawer to prevent removal of battery or alarm. Designed for wall or ceiling mounting. Includes mounting anchors and screws.
Product Features:
- Z-wave compatible smoke and carbon monoxide alarm
- Certified for use with 3rd party Z-Wave systems.
- Reliable electrochemical carbon monoxide and photoelectric smoke sensors
- Mute button, mutes unnecessary alarms immediately. Test alarm function with same button.
- Tamper resistant - locks alarm to mounting bracket to prevent removal of battery and/or alarm
- End of life timer, alarm chirps when it is time to replace it
- 2 AA batteries included
- Meets UL217 & UL2034 Standards
- Operating Voltage: 3V (Two 1.5V AA) Battery Powered
- Audio Alarm: 85dB at 10 ft.
First Alert ZCOMBO-G Product Specifications:
- Alarm Dimensions - 5.0" Dia. x 2.0" H
- Weight - 8.4 oz
- Operating Voltage - 3V (Two 1.5V AA) Battery Powered
- Temperature Range - 40°F (4°C) to 100°F (38°C)
- Humidity Range - 10% to 95% relative humidity (RH)
- Audio Alarm - 85dB at 10 feet
- Wireless Frequency Z-Wave 500 Series
- Wireless Range - 131.24 ft
- Test/Silence- Electronically simulates smoke and CO condition, causing the unit to alarm. Press and hold test/silence button.
- Alarm Reset - Automatic when smoke and/or CO clears
- Smoke Sensor - Photoelectric
- CO Sensor - Electrochemical
- Warranty - 7 years
- Listing - Listed to UL217 and UL2034 Standards
