VISTAHTKVR-V - Resideo First Alert VISTA H3 iBus to VPLEX Converter Module (Up to 64 VPLEX Devices)
First Alert VISTAHTKVR-V Product Description:
The First Alert VISTAHTKVR-V module allows for the addition of VPLEX devices onto a mid-level VISTAH Series system reducing the need to pay more for a larger commercial system. VPLEX sensors can be installed using two wires for power and data instead of the traditional four, reducing wiring costs. These devices draw minimal amounts of current minimizing the need for additional auxiliary power supplies.
VPLEX devices continuously monitor and store functions in the keypad event log that are reported to a central station drastically reducing system maintenance costs when annual tests and inspections are needed.
Product Features:
- 4 modules supported, one for each partition
- 96 total devices, 172 input zones and 52 relay modules (4101SN's) are supported
- 2 built in tampers for for the removal of the cover or from the wall
- Communication is supervised so if wiring is cut a supervision alarm signal will be sent
- Can only be mounted remotely in the included plastic to gang box or wall directly
- Power supply regulation on board - powered off the VISTAH3 controls power and battery backed up if panel losses AC
First Alert VISTAHTKVR-V Product Specifications:
- Dimensions - 6.93" W x 5.43" H x 1.99" D (176mm W x 138mm H x 50.5mm D)
- Operating Temperature - 32°F to 122°F (O°C to 50°C)
- Operating Humidity - 0 to 95% Max (Relative Humidity)
- Electrical Input Voltage - 12 VDC nominal (10-14 VDC)
- Electrical Input Current - 56mA. Note this does not include powered devices using the AUX terminals.
- Electrical Output Voltage - 12VDC nominal (10-14VDC)
- Electrical Output Current - Reference the control panel or power supply, AUX outputs Ratings - 1.3Max
First Alert VISTAHTKVR-V Product Documents:
• Data Sheet - First Alert VISTA H3 iBus to VPLEX Converter Module (VISTAHTKVR-V)
• Installation and Setup Guide - First Alert VISTA H3 iBus to VPLEX Converter Module (VISTAHTKVR-V)
• Summary of Connections - First Alert VISTA H3 iBus to VPLEX Converter Module (VISTAHTKVR-V)
First Alert VISTAHTKVR-V Product Compatibility:
- 269SN - Hold up Switch
- 4101SN - 1 Zone + 1 Relay
- 4190SN - 2-zone Expander
- 4191SN - Recessed Contact
- 4193SN - 1 zone Expander
- 4193SNP - 1 zone Expander
- 4208SN - 8 Zone Expander
- 4208SNF - 8 Zn Exp. w/Class A
- 4208U - 8 Zone Expander
- 4209U* - 4. 2-Wire Smoke Zn
- 4939SN - Surface Mount Contact
- 4959SN - OHD Contact
- 5193SD - Smoke Detector
- 5193SDT - Smoke Detector
- DT8050A-SN - Dual Tec PIR with Anti-Mask
- DT7500SN - Dual Tec PIR
- FG1625SN - Glass Break Detector
- IS2500SN - V-Plex Slim Dual Tech
- IS3050A-SN - Motion Detector
- VPLEX-VSI - V-Plex Short Isolator
*Must be set to serial mode
