VISTAHRELAY - Resideo First Alert VISTA H Relay Module
First Alert VISTAHRELAY Product Description:
The First Alert VISTAHRELAY relay module allows up to four hardwired, form-C (SPDT) relay outputs per module to be added to the VISTA H series control panels. The VISTAHRELAY is mounted remotely and wired to the control panels iBus wiring terminals for power.
The module has a built-in tamper allowing detection and reporting if the front cover is removed and is supervised so if the wiring is cut a supervision alarm will result indicating the module may not be operational. The flexibility to mount the module on a surface wall or to a gang box depending on the installation environment and the terminal strips are removeable to give installers easier access to help making wiring easier.
Product Features:
- Supports normally open, normally closed, common, double balanced, zone doubling and End of line resistors types
- Power supply regulation on board - powered off the VISTAH3 controls power and battery backed up if panel losses AC
First Alert VISTAHRELAY Product Specifications:
- Dimensions - 6.93" W x 5.43" H x 1.99" D (176mm W x 138mm H x 50.5mm D)
- Operating Temperature - 32°F to 122°F (O°C to 50°C)
- Operating Humidity - 0 to 95% Max (Relative Humidity)
- Electrical Input Voltage - 12 VDC nominal (10-14 VDC)
- Electrical Input Current - 25mA standby + 20Ma per active relay
- Contact Rating - 3A max at 30VDC & #A max at 120/240VAC (Resistance Load)
- Power supply (regulation on board) - powered off the VISTAH3 controls power and battery backed up if panel losses AC
- Loop Response Time - 400ms
- Required Loop Resistance - 2.2K ohm
- Agency Listings - NFPA-72 Compliant
