SiXSMOKE - Resideo Honeywell Home Wireless Encrypted Smoke/Heat Detector (for Lyric Control Panel)
Please Note: The Honeywell SiXSMOKE wireless combo smoke/heat detector has been discontinued without replacement.
Honeywell SiXSMOKE Product Description:
The Honeywell Home SiXSMOKE is a wireless combination heat/smoke detector with mounting hardware that is intended for use with the ProSeries or Lyric Controller that supports SiX-Series wireless devices. In a matter of minutes, the SiXSMOKE can be programmed and enrolled into the Lyric Controller (LCP500-L) or ProSeries (PROA7PLUS) all-in-one wireless touchscreen control panel. Due to its SiX-Series Sensor Lock feature, once enrolled, the SiXSMOKE smoke detector cannot be used with another panel until it is removed from the current controller. Each device has a unique MAC number located on the sticker on the unit.
Boasting an impressive 300-foot transmission range, you may place your smoke detector in those far away extra bedrooms from the SiX-Series panel. With a 300° detection pattern, the SiXSMOKE is designed not only to sense even low smoke conditions, but also heat temperature change conditions. The SiXSMOKE has tamper protection, to prevent anyone from deliberately tampering with the enclosure. There are also LED indicators on the smoke detector for visual sensor notifications of an alarm initiating event.
In addition to detecting smoke conditions, the SiXSMOKE also senses temperature raising above 135° F or greator and/or when there is a temperature increase of 15° F or greater within one minute time. The SiXSMOKE has a cover tamper to prevent tampering which has a 10 minute tamper timer that is reset every time the tamper switch is closed or opened or the detector cover is opened. With a supervision of 200 seconds, the SiXSMOKE constantly self checks that it is sending compatible signals to the SiX-Series control panel.
The smoke detector should be mounted on the ceiling or on the wall. Select a location within range of the control panel and mount the SiXSMOKE using the included mounting hardware. If programmed into the control panel, the SiXSMOKE can operate in the one-go-all-go mode, where all the smoke detectors programmed as one-go-all-go in the system will sound on alarm at the same time.
Product Features:
- 128-bit AES Encryption (SiX-Series)
- Combination Smoke and Heat Detector
- Built-in 85dB Audible Siren
- Cover Tamper
- LED indicators
- 360° Detection Pattern
- One-Go-All Go: all heat/smoke/CO detectors in the system programmed as one-go-all-go will sound on alarm
Honeywell SiXSMOKE Product Documents:
• Honeywell Home SiXSMOKE Smoke Detector - Installation Instructions
• Honeywell Home SiXSMOKE Smoke Detector - Quick Installation Guide
• Honeywell Home SiX-SMOKE Wireless Smoke/Heat Detector - Applications Guide
• Honeywell Home SiX-SMOKE Wireless Smoke/Heat Detector - Limitations Guide
• Honeywell Home SiX-SMOKE Smoke Detector - Proper Usage Guide
• Honeywell Home SiX-Series - Enrolling Sensors
Honeywell SiXSMOKE Product Specifications:
- Product Diameter: 135mm (5.30")
- Product Depth: 42mm (1.60")
- Operating Temperature: 32° - 122°F (0°-50°C)
- Relative Humidity: 5-95&per; max., non-condensing
- RF Frequency: 2.4GHz
- Mounting Hardware: Included
- Transmission Range: 300 ft (92 meters)
- LED Indicators: Yes
- Detection Pattery: 360 degree
- Temperature Sensing Capable: Yes
- Encryption: 128-bit AES
- Battery Life: Five years (typical use)
- Power Requirements: 3 Volt CR123 battery (Quantity 2)
- Tamper Protected: Yes
- Authorized Countries: US
- Approval Listings: FCC Part 15/UL 268
