SiXCOMBO - Resideo Honeywell Home Wireless Encrypted Smoke, Heat and Carbon Monoxide Detector (for Lyric Control Panel)
Please Note: The Honeywell SiXCOMBO wireless combo smoke/carbon monoxide detector has been discontinued without replacement.
Honeywell SiXCOMBO Product Description:
The Honeywell SiXCOMBO is a wireless combination smoke, heat and carbon monoxide (CO) detector that is intended for use with the ProSeries or Lyric Controller that supports SiX-Series wireless devices. In a matter of minutes, the SiXCOMBO can be programmed and enrolled into the Lyric Controller (LCP500-L) or ProSeries (PROA7PLUS) all-in-one wireless touchscreen control panel. Due to its SiX-Series Sensor Lock feature, once enrolled, the SiXCOMBO detector cannot be used with another panel until it is removed from the current controller. The SiXCOMBO provides early warning against smoke by using its electrochemical sensing technology to measure smoke or carbon monoxide levels in the air. The SiXCOMBO utilizes SiX™ wireless technology including the one-go/all-go feature where if one unit detects smoke/heat/CO all units will go into alarm at the same time.
Product Features:
- Multi-Criteria Sensing: uses four sensing elements to react faster while minimizing false alarms
- Photoelectric smoke sensor detects airborne smoke particles
- Carbon Monoxide (CO) sensor detects smoldering fires
- Infrared (IR) sensor measures ambient light and flame signatures, such as flame flicker
- Thermal detection monitors for dangerous rise in temperature
- CO Detector End-of-Life reporting (detector needs replacing)
- Smoke detector maintenance reporting (detector needs cleaning or replacing)
- Low Battery Detection
- One Go / All Go: all smoke/CO detectors in the system programmed as one-go-all-go will sound on alarm
- Voice announcements (English only)
Honeywell SiXCOMBO Product Documents:
• Honeywell Home SiXCOMBO Combo Smoke/Heat/CO Detector - Data Sheet
• Honeywell Home SiXCOMBO Combo Smoke/Heat/CO Detector - Installation and Setup Guide
• Honeywell Home SiXCOMBO Combo Smoke/Heat/CO Detector - Quick Installation Guide
• Honeywell Home SiX-Series Devices - Enrolling Sensors
Honeywell SiXCOMBO Product Specifications:
- Dimensions: 2.03" Height , 5.95" Diameter with mounting base
- Case Color: White
- Weight: 13.92 oz. (383 g) without battery
- Operating Ambient Temperature Range: 32°F to 100°F (0°C to 38°C)
- Storage Temperature Range: -10°F to 70°F (14°C to 158°C)
- Operating Humidty Range: 20% to 95% relative humidity, non-condensing
- Mounting: Back boxes: 3.5" and 4" octagonal; single-gang; 4" square; 2 x 4", 3.5? and 4" round ceiling. Direct mount to wall or ceiling
- Voltage: 3 volts DC
- Battery Type: CR-123 lithium
- Battery Manufacturer: Duracell
- Sensitivity: UL limits .9 to 3.5&per;/ft ULC limits .9 to 3.08 &per;/ft
- Thermal Sensor: 135°F Fixed (57°C)
- Audible Signal: 85 dB
- Three Unique Zones: Smoke/Heat, CO and Low Temperature alert
- Agency Listings: US model is fully compliant with ANSI/UL 268 and 2075 standards, FCC certified, ETL listed
Honeywell SiXCOMBO Product LED Indicators:
Multi-Color Top LED:
- Green: Supervisory indication; blinks during power on, reset, and during normal operation
- Amber: Signal maintenance and trouble events
- Red: Alarm condition (either Smoke or CO)
Multi-Color Side Window LED:
- Red: smoke alarm
- Blue: CO alarm
