The Alula RE606M is a Alula Connect+ Panel wireless tilt sensor with a new high accuracy MEMS component. The RE606M tilt sensor monitors the lifting or tilting of anything that moves. It is typically used to secure hatches, overhead roll-up doors and even moveable assets.
The RE606M sends an alarm when tilted more than 45 degrees from the mounting position. If the sensor rotates further than 135 degrees, it is likely to remain in a non-alarm state. For best results, the sensor should rotate within 90 degrees to ensure an alarm state occurs.
Install by mounting the sensor to the inside of a door or window using the mounting screw locations. For garage door installations, the sensor should be mounted to the top panel of the overhead door. This ensures that the sensor closes only when the door is fully closed, and is best for RF range.
The cover of the sensor has a tamper that will alarm when opened, and sends a supervisory signal every hour. To enroll the sensor, all you have to do is place the panel in enrollment mode and tamper the device.
Product Features:
Triggers at approximately 45 degrees tilt
Monitors any lifting or tilting door, or equipment movement
Mount vertically in non-alarm position
Strong, reliable RF signal
10-15 year battery life on CR123A battery
Low Battery indication
Alarm for anything that tilts
Useful for hatches, roll-up doors and even moveable assets