PG9WLSHW8 - Qolsys Hardwired-to-Wireless Encrypted Security Sensor Translator (for PowerG Control Panels)
Qolsys PG9WLSHW8 Product Description:
The Qolsys PG9WLSHW8 IQ Hardwire PowerG is a wired to wireless converter module that converts existing hardwired zones to PowerG wireless zones. With the PG9WLSHW8 IQ Hardwire PowerG you can connect up to 8 hardwired zones wirelessly to the Qolsys PowerG compatible security system. It's easy to DIY install and is the perfect solution for existing systems or new construction.
Please note, you need to upgrade the Qolsys IQ Panel 2 Plus firmware to 2.5.3 or higher before enrolling this module. The bell output supports continuous burglary alarms, fire alarms and CO alarms. The AUX1 auxiliary power is used only for burglary alarm initiating devices. And, the AUX2 auxiliary power is used only for fire alarm initiating devices such as smoke, heat and CO detectors.
Product Features:
- Pair up to 2 hardwire units to the IQ Panel 2 Plus
- Connect siren, strobe and 4 PGMs for a full range of applications
- 2 Auxiliary independent power circuits
- Supports 18 conventional 2-wire smoke detectors
- Incorporate any hardwire device into the PowerG ecosystem
- Two-way TDMA communication
- Enhanced security is enabled by the double end-of-line programming, tamper protection (including back tamper) and the integrated power supply supervision
- UL and ULC Listed
Qolsys PG9WLSHW8 Product Specifications:
- Dimensions: 8.9" x 10" x 3"
- Weight: 2.85 kg (6.28 lb) including the battery
- Input Voltage: 18.0VDC Plug-In Transformer
- Backup Battery: 12VDC 7AH Max (not included)
- Input Zones: 8
- Siren Output (Supervised): 12V @ 700mA
- Freqency Band: 912.75 MHz to 919.106 MHz
- Maximum Power: 0.0447 W
- Encryption: AES 128-bit encryption
- Operating Temperature: 14°F to 131°F (-10°C to 55°C)
- Operating Humidity: 5 to 93% RH non-condensing (UL and ULC ony verified operation for a maximum of 93% RH)
- Input for UL and ULC applications: 120 VAC, 60 Hz, 1.2A
- Input for EN50131 applications: 240 VAC (+10%, -15%), 50 Hz, 1.2A
- Output: 18 VDC, 2.22 A
- Battery Type: Sealed, rechargeable lead acid
- Battery charging voltage and current: 13.7 VDC, 360 mA
- Low Battery Threshold: 11.4 VDC
- Battery Cutoff Level: 9.6 VDC ± 2%
- PCB assembly current consumption: 70 mA
- PGM 1, 3, and 4 voltage and current: 11.3 VDC to 12.5 VDC, 50 mA
- PGM 2 voltage and current: 11.3 VDC to 12.5 VDC, 300 mA
Qolsys PG9WLSHW8 Product Documents:
• Installation Guide for Qolsys PG9WLSHW8 IQ Hardwire PowerG Wired-to-Wireless Converter
• Quick Start Guide for Qolsys PG9WLSHW8 IQ Hardwire PowerG Wired-to-Wireless Converter
Qolsys PG9WLSHW8 Product Includes:
- The plastic enclosure containing the IQ Hardwire PowerG Wired to Wireless Converter
- The transformer
- The hardwire pack
Qolsys PG9WLSHW8 Product Compatibility:
- DSC Iotega Control Panels
- DSC PowerSeries Neo Control Panels
- DSC PowerSeries Pro Control Panels
- Qolsys IQ Panel 2 Plus Control Panels
- Qolsys IQ Panel 4 Control Panels
- Qolsys IQ Hub Control Panels (Model Numbers: QS9301-0208-840, QS9302-0208-840)
- Qolsys IQ4 Hub Control Panels (Model Number: IQPH054)
