PG9935 - DSC Wireless Encrypted Shock Detector with Optional Auxiliary Contact (for PowerG Control Panels)
DSC PG9935 Product Description:
The DSC PG9935 is a wireless PowerG shock sensor with optional magnetic alarm contact and auxiliary input. The PG9935 fits windows, doors, walls or roofs and is ideal for residential or commercial installations. It detects and analyzes a series of low level shocks (up to 10 low level shocks within 30 seconds) while ignoring background vibrations and provides early warning of any attempt of instrusion prior to break-in.
The PG9935 also includes an optional magnetic contact. The magnetic contact protects door/window openings and alerts if an intruder tries to mask the the magnetic field of the contact. Additionally, the PG9935 includes an optional auxiliary input in which the connection of other hardwired device can be made. The auxiliary input is configurable to be Normally Open, Normally Closed or Single End-of-Line.
The PG9935 wireless shock detector integrates a unique, 7-segment display that allows the installer to set the shock level and displays the actually shock level while testing. This enables fast and accurate setup of the device to ensure superior detection and reduced false alarms.
Product Features:
- Ideal for a wide range of residential and commercial applications
- Ensures reliable performance using built-in PowerG leading-edge wireless intrusion technology with two-way communication
- Early detection of gross attacks or low-level shocks
- Can be installed quickly in locations where cabling would be difficult and unsightly
- High immunity to background vibrations which can cause false alarm
- Protects windows, doors, walls and roofs against forced entry
- Quick and easy installation using unique 7-segment shock meter and push buttons
- Optional auxiliary input to connect wired detectors, pushbuttons or other detection devices, can be enrolled as a separate zone
- Prolonged battery life of up to 5 years (for typical use) with all sensors enabled
- Low battery indication
- Backed by DSC's 1-year limited manufacturer's warranty
DSC PG9935 Product Specifications:
- Dimensions (L x W x H): 4-5/8" x 1-1/8" x 1-3/16" in (118mm x 27mm x 30mm)
- Weight (including battery): 130g (4.6 oz)
- Communication Protocol: PowerG
- Alarm Input: On auxiliary
- Supervision: Signaling at 4-min. intervals
- Tamper Alert: Reported when a tamper event occurs
- Battery Life: 5 years (for typical use) with all sensors enabled
- Battery Type: 3V Lithium CR-123A Battery (Panasonic or GP)
- Door frame height: typical 7ft to 8ft (213 to 244 cm) 1/2
- Door frame width: typical 1ft to 4ft (30.5 to 122 cm) 1/2
- Door frame thickness: 1-1/2" to 1-3/4" in (3.8 to 4.4 cm)
- Window/glass insert size: any size that will fit within the door frame listed above. Install the contact so that a door or window cannot be opened more than 2" (5.1 cm) without causing an alarm condition.
- Frequency Band (MHz): CE Listed PG4935: 433MHz; CE listed PG8935: 868MHz; FCC/IC/UL/ULC listed PG9935: 912-919MHz
- Operating Temperature: 14°F to 131°F (-10°C to 55°C)
- Relative Humidity: 93% max. non condensing
- Auxiliary Input Cable Length: 10m max. AWG22
- Auxiliary Input EOL Resistor: 2.2KΩ
- Auxiliary Input EOL Resistor: 2.2KΩ
- Compatible Receivers: 433 MHz Band: HSM2HOST4; HS2LCDRF(P)4; HS2IC-NRF(P)4; PG4920
868MHz Band: HSM2HOST8; HS2LCDRF(P)8; HS2IC-NRF(P)8; PG8920
912-919MHz Band: HSM2HOST9; HS2LCDRF(P)9; HS2IC-NRF(P)9; PG9920 - Approvals: UL 634 and ULC/ORDC634, FCC Part 15
DSC PG9935 Product Documents:
• DSC PG9935 Wireless PowerG Shock Sensor and Contact - Datasheet
• DSC PG9935 Wireless PowerG Shock Sensor and Contact - Installation and Operations Guide
DSC PG9935 Product Compatibility:
- DSC Iotega Control Panels
- DSC PowerSeries Neo Control Panels
- DSC PowerSeries Pro Control Panels
- Qolsys IQ Panel 2 Plus Control Panels
- Qolsys IQ Panel 4 Control Panels
- Qolsys IQ Hub Control Panels (Model Numbers: QS9301-0208-840, QS9302-0208-840)
- Qolsys IQ4 Hub Control Panels (Model Number: IQPH054)
