PG9200AX - DSC Wireless Encrypted Photoelectric Twin Beams Detector (for PowerG Control Panels)
Please Note: The DSC PG9200AX wireless PowerG photoelectric twin beams detector is a special order item.
DSC PG9200AX Product Description:
The DSC PG9200AX is a PowerG wireless photoelectric twin beam detector that provides protection for outdoor perimeters up to 200 feet. The PG9200AX beam detector consists of a receiver and a transmitter. It is designed to detect an intruder and activate an alarm control panel; they are part of a complete system, therefore the manufacturer cannot accept responsibility for any damages or other consequences resulting from an intrusion.
Product Features:
- PowerG robust, industry leading commercial grade wireless technology
- Aesthetically pleasing slim and compact design
- Ideal for commercial applications and large residences
- Market-leading perimeter detection using Active Infrared Technology (Photoelectric beams) and PowerG range
- Transmitter is designed to send an infrared beam over long distances
- Coverage area of 200 ft. with short range model
- Easy to install with view finder, alignment dials and LED indicators
- Reliable performance with twin beams
- Cover and wall tamper protection
- Extended battery life with PowerG
- Polycarbonate cover protects the cover of the beams from UV rays and other harsh environmental conditions
- IP55/IP65 dust-tight and waterproof rating ensures dependable operation even in extreme conditions
- Compatible with DSC PowerSeries Neo Systems, DSC PowerSeries Pro, Qolys IQ Panels
DSC PG9200AX PowerG Technology:
Since its introduction in 2010, PowerG has revolutionized the wireless industry. Today, as a result of extensive research and development, it is clear that PowerG's ability to provide robust communication - even in areas that were previously only suitable for hardwired applications - makes it ideal for a wide range of applications.The power of the technology lends itself to a multitude of installs, from residential sites to small enterprises and big-box operations.
- Multichannel, Frequency Hopping Spread Spectrum technology - to overcome frequency blocking and interference
- Adaptive Transmission Power - for battery life preservation
- High transmission ranges - for reliable communication within up to 2km/2187 yards line-of-sight
- TDMA synchronized communication technology - to prevent message collisions
- 128 bit AES encryption - high level protection against analysis tools and digital attacks
DSC PG9200AX Product Specifications:
- Dimensions (L x W x D): 8.5 " x 3.47" x 6.4" (217mm x 88.1mm x 162.5mm
- Range: 200 ft (60 m)
- Detection method: Infrared beam interruption detection
- Beam frequency selection: 4 channels
- Interruption period: Variable between 50, 100, 250, and 500 msec
- Power Source: Recommend: 3.6 V, 13.0 Ah LSH20 lithium batteries manufactured by SAFT.
- Current draw: 810 µA T: 490 µA + R: 320 µA (at 77°F (25°C), 3.6 VDC)
- Battery Life: Transmitter: Approximately 3 years. Receiver: Approximately 5 years (typical use)
- Alarm Indicator (Receiver): Light on - Beam not received. Flickering Light - IR Beams not received sufficiently. Light off - Beam receive
- Power (Transmitter): Power ON: ON, Power OFF: OFF
- Low battery: Voltage Reduction: blink
- Operating Temperature: -4°F - 140°F (-20°C - 60°C)
- Operating ambient humidity: 95% (Max.)
- Alignment angle: ±90° Horizontal, ±5° Vertical
- Weight: 56.4 oz (1600 g) (total weight of transmitter and receiver, excluding accessories)
- Waterproof rating: IP55
- Frequency: 912-919 MHz 128/256 second intervals
DSC PG9200AX Product Documents:
• User Guide for DSC PG9200AX Wireless PowerG Photoelectric Twin Beams Detector
DSC PG9200AX Product Compatibility:
- DSC Iotega Control Panels
- DSC PowerSeries Neo Control Panels
- DSC PowerSeries Pro Control Panels
- Qolsys IQ Panel 2 Plus Control Panels
- Qolsys IQ Panel 4 Control Panels
- Qolsys IQ Hub Control Panels (Model Numbers: QS9301-0208-840, QS9302-0208-840)
- Qolsys IQ4 Hub Control Panels (Model Number: IQPH054)
