Home > LTEM-PIV - Resideo Honeywell Home Dual-Path Ethernet/Cellular Verizon LTE Cat-M1 Residential Fire Alarm Communicator (for VISTA-Series Control Panels)
LTEM-PIV - Resideo Honeywell Home Dual-Path Ethernet/Cellular Verizon LTE Cat-M1 Residential Fire Alarm Communicator (for VISTA-Series Control Panels)
The Resideo LTEM-PIV is a Total Connect 2.0 dual-path (internet and cellular Verizon LTE) alarm communicator designed for the Honeywell VISTA-15P, VISTA-20P, VISTA-128BPT, VISTA-250BPT control panels. Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks. The LTEM-PIV has full data reporting and uploading/downloading for most Honeywell VISTA control panels.
The LTEM-PIV utilizes CAT-M1 technology which is used by leading carriers because it has greater signal strength and power efficiency. The LTEM-PIV should be installed in situations that require greater signal strength as it has improved performance underground and within structures when compared to the LTE-IA and LTE-IV. The LTE CAT-M1 technology is available everywhere that current LTE networks reach with strong enough reception for consistent connections.
All signals are delivered to Honeywell's AlarmNet® Network Control Center, which routes the information to the AlarmClub central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery.
Please note, Total Connect 2.0 interactive services are compatible with Honeywell VISTA 15P/20P control panels that are revision numbers 9.12 or greater.
Product Features:
Specified to meet UL 985 Standard for Household Fire Warning System Units
Quick connection to Resideo control panels (see panel compatibility)
Supports both ECP and Bus connections to compatible control panels
Power supplied by a 9VDC power adapter (included)
Supports dynamic or static IP addressing, and installs behind firewalls without compromising network security (provided that the communication path includes IP)
Supports connection to the internet via Ethernet cable
Reports fire, burglary, and status messages via the internet
Reports messages via cell as backup to internet reporting (provided that the communication path includes cell)
Allows uploading and downloading of VISTA control panel data
Resideo Total Connect® 2.0 Remote Services allow the end user to access their security system from their computer via the website. Availability of this service is controlled by the dealer via the web-based programming tool on the AlarmNet 360® website
Supports remote control of alarm systems via Resideo Total Connect Remote Services feature
Multi-function test switch used to generate test messages and to reboot (reset) the communicator
Dimensions: 9.1" (23.2cm) x 9.1" (23.2cm) x 2.2" (5.7cm)
Weight (without battery): 1.5 lbs (700g)
Electrical Input Power: : 9VDC, 2.5 A
Cellular Network: : Verizon CAT-M1 technology
Current Drain (Stand-Alone Unit): 70mA idle, 240mA average active
Power Supply: 9VDC Power Adapter included (Part # 300-04705v1)
Backup Battery: 4V, 6.5AH (Part # R300-11454)
Expected Battery Life: 5 Years (approx.)
Weight (with battery): 3.3 lbs (1500g)
RF Antenna: Internal multi-Band antenna
Operating Temperature: 32° to 120° F (0° to 49° C)
Storage Temperature: -104° to 158° F (-40° to 70° C)
Relative Humidity: 0 to 95% non-condensing
for UL installations 0 to 85%
for ULC installations 0 to 93%
Altitude: Up to 10,000 ft. (3,048m)operating; to 40,000 ft. (12,192m) storage
Ethernet Network Standard: IEEE 802.3u compliant
Ethernet Data Rate: 10Base-T (10Mbps) / 100Base-T (100Mbps) with auto detect
Ethernet Cable: Cat. 5 (min), MDI / MDI-X auto crossover
Wire Lengths: ECP and BUS connection maximum wire lengths Minimum Wire Gauge #22 - 75 ft (23m) Distance from Panel Minimum Wire Gauge #20 - 120 ft (27m) Distance from Panel Minimum Wire Gauge #18 - 170 ft (52m) Distance from Panel Minimum Wire Gauge #16 - 270 ft (82m) Distance from Panel
Approvals: UL 985 Standard For Household Fire Warning System Units
UL1610 Central-Station Burglar-Alarm Units
UL1023 Household Burglar-Alarm System Units
UL365 Police Station connected Burglar Alarm Units and Systems
ULC S304 Standard for Control units, Accessories and Receiving Equipment for Intrusion Alarm System