LTE-L57C - Resideo Honeywell Home Cellular Bell Canada LTE Alarm Communicator (for LYNX Touch L5200/L5210/L7000 Control Panels)
Please Note: The Honeywell LTE-L57C cellular Bell Canada alarm communicator (for LYNX Touch Panels) has been discontinued without replacement.
Honeywell LTE-L57C Description:
The Honeywell LTE-L57C is a cellular alarm communicator, designed for use with the LYNX Touch L5210 and LYNX Touch L7000, that sends UMTS/HSPA dual-band alarm signals over the Bell Canada LTE cellular towers to AlarmClub's central station. The LTE-L57C is easy to maintain and replace. Easy to diagnose LED's provide signal strength and status indication. Through this LTE-L57C cellular alarm communicator, control panel data can be uploaded and downloaded via the LTE module which furthers the simplication of the setup. These next-generation LTE communicators utilize 256-bit AES encryption for a higher level of security.
Product Features:
- Full Contact ID: Contact ID reporting using ECP mode with compatible Honeywell LYNX Touch control panels.
- 256-bit AES Encryption: Advanced encryption standard used for secure communications.
- Upload/Download: Available with select Honeywell control panels.
- Integration: Quick and easy installation of cellular communicator for LYNX L5200/L5210/L7000 control panels.
- Diagnostic LEDs: Provide signal strength and status indications.
- QOS: Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
- AlarmNet360™ Online Management Platform: Remote programming and diagnostics
- Remote Services Capability: Optional Honeywell Total Connect remote services provide on-the-go security and home control, video viewing, and real-time alerts, anytime, anywhere, on any PC or smart device.
- FOTA Firmware Upgrading: Complete over-the-air firmware upgrading capability. Provides remote service management ability.
- Design: Integrated Vista ECP design, four-wire connection, LTE Cat 1
Please Note: The LTE-L57C cellular alarm communicator is compatible with LYNX Touch L5200/L5210/L7000 Panels that are Rev. 9.0+.
Honeywell LTE-L57C Documents:
• Honeywell LTE-L57C Cellular Alarm Communicator - Data Sheet
• Honeywell LTE-L57C Cellular Alarm Communicator - Installation Guide
Honeywell LTE-L57C Specifications:
- Dimensions: 4.75" x 2.5" (12.1cm x 6.4cm)
- Input Voltage: 5V
- Current Drain: 490mA
- RF Antenna: Internal Penta-Band antenna with receive diversity for LTE CAT1. Average 2.4 dBi gain.
- Operating Temperature: -4° to 131°F (-20° to 55° C)
- Storage Temperature: -40° to 158°F (-40° to 70° C)
- Agency Listings: ETL Listed
- Panel Compatibility: L5200/L5210/L7000 controls version 9.00.xxx
Honeywell LTE-L57C Compatibility:
- Honeywell LYNX L5210 Control Panel - Revision 9.0 and above
- Honeywell LYNX L7000 Control Panel - Revision 9.0 and above
