iGSMHS4G - Resideo Honeywell Home High-Security Dual-Path Alarm Communicator (for VISTA-Series Control Panels)
Please Note: The Honeywell iGSMHS4G dual-path high-security communicator (for VISTA-Series Panels) has been discontinued and replaced by the newer LTE-IV, LTE-IA or LTE-IC model number(s).
Honeywell iGSMHS4G Alarm Communicator:
The Honeywell iGSMHS4G is high security, dual-path (internet and GSM cellular) communicator designed to meet UL high line security requirements for ULAA applications. The iGSMHS4G cellular communicator transmits signals to the AlarmNet Control Center (via the internet or GSM cellular network), which in turn routes signals to the AlarmClub central station. If the Internet and GPRS (part of the GSM cellular network) are both unavailable (fail), the message will not be sent from this communicator.
The iGSMHS4G is backwards compatible with 2G and 3G service. The trademarked "IntelliPath" feature enables the iGSMHS4G to auto-select the optimum GSM path (2G, 3G or 4G). The iGSMHS4G offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, onboard zone inputs and option dialer capture capability makes the iGSMHS4G IntelliPath-Series communicator compatible with other manufacturer's security panels.
Transmission Protocols:
- HSPA+ (4G )
- HSPA (HSDPA & HSUPA) (3G)
- EDGE (2G)
- GPRS (2G)
Product Features:
- Dual-path technologies using Internet combined with cellular signal delivery
- Multi-GSM platform compability - 2G, 3G and 4G
- Automatic selection of the best available GSM network
- 4G capable using HSPA+ protocol
- Full Contact ID or ADEMCO® High-Speed Reporting: Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for nonECP capable control panels.
- 256-bit AES Encryption: Advanced encryption standard used for secure communications.
- Upload/Download: Available with select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
- Integration: Quick and easy installation of GSM for VISTA® and LYNX controls.
- Dynamic Signaling with Certain Honeywell Control Panels: Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.
- QOS: Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
- Diagnostic LEDs: Provide signal strength and status indications.
- Web-Based Programming: Allows complete interactive programming from AlarmNet Direct. https://services.alarmnet.com/ AlarmnetDirect
- Intelligent Supervision: Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.
- Line Security: Approved for line security applications with 200-second supervision intervals. Service subscription required.
- Six Input Zones: Digital processing for improved detection and false alarm protection.
- Tamper Protected Enclosure: Built-in tamper sends a report when tamper condition is detected and a restore when cleared.
- Built-in Power Supply: Onboard charging circuit design accommodates backup battery. Includes primary power and battery supervision.
- Back-up Battery: 6V 3.1Ah supplied to 24 hours of standby operation.
Honeywell iGSMHS4G Product Specifications:
- Dimensions: 8.4" x 8.0" x 1.5"
- Weight: 2.4 lbs. with battery
- Case Color: White
- Operating Temperature: -20°C to 55°C
- Storage Temperature: -40°C to 70°C
- Humidity: 0 to 95% relative humidity, non-condensing
- Altitude: to 10,000 ft. operating; to 40,000 ft. storage
- Input Power: 16.5VAC, 40VA transformer, Honeywell Model No. 1361
- Backup Battery: 6V, 3.1AH, Honeywell Part No. K14139, (included)
- Expected Battery Life: 4 years approx.
- Current Drain: 65mA average standby, 380mA peak transmit
- Fault Relay Output: Open collector, 12VDC, 0.25W max
- Input Trigger Levels: (V+) 6V – 13V; (V-) 4V – 0V
- RF Transceiver Type: GSM/GPRS, UMTS/HSPA+
- Antenna: Internal GSM quad-band 1.3 dBi gain
- Listings UL 365: Police Station Connected Burglar Alarm Units and Systems
- Listings UL 1610: Central Station Burglar Alarm Units
Honeywell iGSMHS4G Product Documents:
• Data Sheet - Honeywell's AlarmNet iGSMHS4G Dual-Path Communicator
• Installation Guide - Honeywell's AlarmNet iGSMHS4G Dual-Path Communicator
• Summary of Connections - Honeywell's AlarmNet iGSMHS4G Dual-Path Communicator
Honeywell iGSMHS4G Product Compatibility:
• 1361
• 7626-5
• 7626-12
• 7626-50HC
• 7720P
• CELL-ANT
• CELL-ANT3DB
• CELL-ANTHB
• CELL-EXT
• DCID
• DCID-EXT
• GSM-ANT
• GSM-ANT3DB
• GSM-ANTHB
• GSM3DB25KT
• GSM3DB50KT
• GSM3DBKT
• K14138LF
• K14139
• K1439LF
• K4668WH
• LYNXGSMEXTCB
• VBPCOMKIT
• VFBPCOMKIT
• WA7626-CA
