Product Features:

• Complete line: The three available coverage patterns 11/18/30 Meter models (35/60/100') can satisfy every installation, all with the same family look. With three versions, the un-tampered IS2500, the tampered IS2500T and fully featured IS2500TC, we have all the features needed for every installation.
• Global Compliance: Our designs meet many of the world's motion detector standards, including the new EN50131-1 and TS50131-2-2 standards.
• Easy Installation: The IS25100TC family contains 45° terminal blocks, EOL terminals and our new automatic walk test, making installation and testing a snap.
• Selectable Sensitivity: Two DIP switches make it easy to adjust the sensitivity and adequately protect the premises. Four different levels are available. Each setting modifies either the PIR pulse count or the alarm threshold, allowing the installer utmost flexibility.
• Flexible Mountings: Mounts on walls, in corners or on ceilings, with heights from 2.3-2.7 meters (7'6" to 9'). The IS2500 works with the SMB10 family of swivel brackets.
• Low temperature version: With the IS2500LT (low temp), there is now a product that can be used in cold environments to temperatures as low as -40°C. Applications include but are not limited to unheated sheds, garages, warehouses, etc.
• False Alarm Immunity: Designed to meet false alarm standards including SIA, EN50131-1 and TS50131-2-2. Microprocessor control helps filter out real signals from false sources. Our patented Black Bug Guard improves falses due to bright lights.
• Easier Maintenance: Easy to maintain when installed with remote test and alarm memory features.
• Uniform Sensitivity Optics: Custom designed Fresnel lenses help detect intruders at the edge of the protected area as easily as an intruder is directly in front of the sensor.
• Patented Mirror Look Down: Provides better coverage up close with multiple zones in the look down area.
• Product Warranty: Backed by Honeywell's 2-year limited manufacturer's warranty
• All three lenses included: 11m x 12m (35' x 40'), 18m x 26m (60' x 85'), 30m x 6m (100' x 20')
• Smart contact: Disables/enables fault/restore messages for PIR with panels enabled for smart contact
• High traffic inhibit: Delays second alarm transmission for 5-15 seconds to help speed up the V-Plex bus
• 45° terminal blocks
• DIP switch programming
• Automatic walk test mode
• Four sensitivity settings
• Uniform sensitivity optics
• Microprocessor controlled
• Patented Zero Clearance Black Bug Guard
• Patented mirror look down
• Form C Relay
• Serial Number Addressable
• Totally silent tamper proof relay
• Case and wall tamper

• Dimensions: 2.93" W x 4.93" H x 1.68" D (75mm W x 125mm H x 43mm D)
• Color: White
• Operating Temperature: -4°F to 131°F (-20°C to 55°C)
• Relative Humidity: 5 to 95&per; non-condensing
• Lenses Includes (included): 35' x 40' (90°) (11m x 12m)
• Lenses (sold seperately): Long Range: 89' x 18' (27m x 5.6m)
• Optics: Fresnel
• Addressability: Serial Number
• Pyro Sensor: Dual
• Range: 50' x 60' (90°) (15m x 18m)
• Current Draw: 1.6mA nominal/4.7mA max.
• Look-down Zone/Fingers: Yes/Four
• Temperature Condensation: Yes, Enhanced Dual Slope
• Certifications: cULus, cETLus, CE
• Family Look: Yes
• Self Test: Yes (including Pyro)
• Smart Contact: Yes, is an enhanced V-Plex protocol, allowing the system to communicate with sensors differently. Smart Contact mode works with panels that are enabled for Smart Contact (VISTA-128FBP and VISTA-250FBP)
• Sensitivity Settings: Four
• Mounting Height: 6' to 9'
• Swivel Bracket Types: Three (ceiling and wall)
• Animal Immune: Yes (selectable 0, 40, 80 lbs.)
• Warm Up Time: One minute
• Tamper: Front and back
• Automatic Walk Test: Yes
• UV Tolerant Lens: Yes
• White Light Immune: Active