2GIG-TILT1e-345 - 2GIG Wireless Encrypted Garage Door Tilt Sensor (for eSeries Control Panels)
2GIG-TILT1e-345 Product Description:
The 2GIG-TILT1e-345 is a wireless eSeries encrypted tilt sensor that is designed for applications where the tilt status of an asset, such as a garage door, needs to be monitored. Other uses for the TILT1e-345 might include: mailbox doors, large pet doors, or hinged storm cellar doors. The TILT1e-345 tilt sensor communicates with the control panel using the 345 MHz frequency. Once the sensor is tilted to 45 degrees, the sensor will transmit to the panel. The sensor will also send a restore signal when the sensor it returned to less than 45 degrees.
The 2GIG-TILT1e-345 is equipped with a cover tamper switch and low battery monitoring. If the case of the Tilt Sensor is removed for any reason, the radio transmitter will send a tamper alert. Should the battery voltage drop below a prescribed level, the sensor will send a low battery report indicating that the battery should be replaced. The 2GIG-TILT1e-345 is compatible with GC2 firmware revisions 1.14 and higher.
Product Features:
- Sensor transmits alert when tipped 45° off vertical
- Restore signal sent when sensor returned to less than 45°
- Requires GC2 panel firmware revision 1.14 or higher
- Long life lithium battery (included)
- Screw, adhesive mount (included)
2GIG-TILT1e-345 Product Specifications:
- Typical battery life - 5 to 8 years
- Battery Life - Up to 5 years
- Operating Temperature - 2°F to 120°F (0°C to 49°C)
- Operating Relative Humidity - 5 to 85%, non-condensing
- Operating Frequency - 345 MHz
- Tilt Switch Angle - 45 degrees
2GIG-TILT1e-345 Installation Tools:
• Phillips Screw Driver
• Variable Speed Drill with 1/16" Drill Bit
2GIG-TILT1e-345 Product Includes:
• (1) 2GIG Garage Door Sensor
• (1) Sensor Backing Plate
• (1) Battery (Installed in Sensor)
• (2) 5/8" Phillips Screws
• (1) Double Stick Tape Strip
